Informazioni
- Potenza: 200 - 350CV
- Cilindrata: 1.0L - 2.5L
- 44mm Compressor Inducer
- 56mm Compressor Exducer
- Outline interchangeable with GBC 17 / 20
- Internal wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Supports up to 350 horsepower
- Journal Bearing Rotating Group
- Engineered for small displacement engines including powersports, personal watercraft and automobiles
- ☎ Chiama: +39 071715693
- ✉ Scrivi: info@saito.it
- ACQUISTA ONLINE
Descrizione
| GBC22-350
Turbo PN: 896055-5003S |
Compressor | Turbine | |||||
|---|---|---|---|---|---|---|---|
| Inducer | Exducer | A/R | Inducer | Exducer | Trim | A/R | |
| 44mm | 56mm | 0.59 | 50mm | 46mm | 84 | 0.64 | |
The best solution for small engine displacements
Club Line is a product engineered for small engine displacements. This includes powersports, personal watercraft, and automobiles. These turbochargers feature internally wastegated turbine housings and journal bearing rotating groups. GBC stands for GARRETT BOOST | CLUB LINE. The first two numbers indicate the turbo frame size. The larger the number the larger the turbine wheel. The numbers following the dash indicate the peak potential flywheel horsepower rating.
Compressor Aero
Forged, fully-machined compressor wheels with advanced aero is offered in 44mm inducer size and 56mm exducer. GBC22-350 can support from 200-350 horsepower. The compressor wheel is a 62 trim and the Compressor housing A/R is 0.59 A/R. This turbocharger can support up to 37 lbs/min of airflow and up to 3.5 pressure ratio. Performance results of this product are highly dependent upon your vehicle’s modifications and tuning/calibration. The target power represented has been calculated based strictly on choke flow of the compressor map (total turbo capability), which represents the potential flywheel power.
Journal Bearing Rotating Group
The oil cooled center housing features the latest generation of journal bearing rotor group.
Internally Wastegated
Club Line turbochargers are fully assembled with an internally wastegated turbine housing. Garrett’s technicians calibrate the actuator for optimum performance, eliminating any need for adjustment. Club Line turbochargers are calibrated with a 0.5 bar actuator. Actuators with higher pressure settings (1.0, 1.5 bar) are available for individual purchase.
Turbine Housing
The GBC22-350 turbine housing inlet flange is standard T25 spec, and the outlet features a 5 bolt pattern. The 5 bolt outlet pattern is the same flange as the GT25 / GT28 turbos.
Compressor Housing Specs
The compressor housing outlet and inlet specs are the same at GT22 turbochargers.
